Tuning The Television Using Quick Setup - Language, Country, Broadcast System; Programme Sorting - Toshiba 46WM48 Série Manuel De L'utilisateur

Tuning the television using Quick setup,
Before switching on the television put your decoder and video recorder (VCR) to Standby if they are
connected. To set up the television use the buttons on the remote control as detailed on page 5.
1 Connect the television to the mains power. The
Quick setup screen will appear.
Quick setup
Select your language.
Language
Press Q to highlight Language.
EXIT Watch TV
Using S or R select your Language, then press
2
OK.
Then press S or R to select your Country and
3
press OK.
Your System will have been selected, if there is a
4
choice, press R to select from the systems
displayed.
B/G – Continental Europe,
D/K – Eastern Europe, L1, L2 – France
To start Auto tuning press OK.
5
Auto tuning
Searching
Channel : 6
EXIT Stop
The search will begin for all available stations.
6
The slide bar will move along the line as the
search progresses.
You must allow the television to complete
the search.
When the search is complete the television will
automatically select programme position 1. This
may not be a clear picture or the signal may be
weak, so the station order can be changed using
Programme sorting which will appear on the
screen.

Programme sorting

English
Next
I
– UK
Station :
With the list of stations now showing use Q or P
7
to highlight the station you want to move and
press R .
The selected station will be moved to the right of
the screen.
Prog.
1
2
3
4
5
6
Sort
MENU
8 Use Q or P to move through the list to your
preferred position. As you do so the other stations
will move to make room.
Press S to store your move.
9
Repeat as necessary, then press EXIT.
If the television cannot be connected to a
VCR/decoder with a SCART lead or if a station on
another system is required, use Manual tuning
to allocate a programme position, see page 10.
9
Programme sorting
Channel Station
22 BBC1
28 BBC2
25 ITV
32 CH4
69
69
Store
Back EXIT Watch TV