Toshiba 46WM48 Série Manuel De L'utilisateur page 25

Below are the answers to some of the most common queries.
For more information got to www.toshiba.co.uk
Q
Why is there no sound or picture?
A
Check the mains switch is on and check all
connections.
Check the television is not in standby mode.
If the lamp unit has recently been replaced, make sure
that it has been installed properly and that the unit door
has been replaced correctly.
Q
Why is the picture very dark?
A
The lamp unit may need to be replaced.
Q
There is a picture, but why is there little or no
colour?
A
When using an external source, for instance, a
poor quality video tape, if there is little or no
colour, improvements may sometimes be achieved. The
colour is factory set to Auto. to automatically display the
best colour system.
To check that you have the best colour:
With the external source playing, select Manual
1
setting from the SET UP menu.
Manual setting
Colour system : Auto.
EXT3 A
Store MENU
With P or Q choose between Auto., PAL,
2
SECAM, NTSC 4. 43 or 3. 58.
Q
Why doesn't the video/DVD being played show
on screen?
A
Make sure the VCR or DVD player is connected to
the television as shown on page 6, then select the
correct input by pressing B
Q
Why is there a picture but no sound?
A
Check the volume has not been turned down or
that sound mute has not been selected.
Q
uestions
V C R
Back EXIT Watch TV
.
A
nswers
and
Q
Why is the VCR/DVD picture in black and
white?
A
Check the correct input has been chosen,
S-VIDEO or AV. See AV connections.
Q
Why is there a good video picture but no sound?
A
Check the SCART lead connection.
Q
What else can cause a poor picture?
A
Interference or a weak signal. Try a different
television station. Manual fine tuning may help.
Select the Manual tuning menu. Highlight the
1
station and press OK, then press R to select
Manual fine tuning.
Using P or Q adjust to get the best picture and
2
sound. Press OK and then EXIT.
1 I A
Store MENU
Q
Why is the screen dimly lit and fan still running
when the television is off?
A
The Quick restart mode is set to On. To stop this
set the mode to Off.
Q
Why don't the controls on the front of the
television work?
A
Check that Panel lock is not On.
Q
Why doesn't the remote control work?
A
Check the side switch on the remote control is in
TV mode.
Check the batteries aren't dead or inserted incorrectly.
25
Manual tuning
Manual fine tuning
22 + 2 B B C 1
Back EXIT Watch TV