Franke CRYSTAL SEMI-PRO Manuel D'installation Et D'entretien page 5

Periodic checks
12
Check connection and shower hoses periodically for the following:
X X
– Watertightness
– Corrosion
– Mechanical damage
Use original spare parts only.
X X
Replace damp or dripping hoses.
X X
Replace hoses with rusty or oxidized surfaces.
X X
Replace hoses that show signs of mechanical damage.
X X
Flush all pipes thoroughly before installation.
X X
Operating data
Operating pressure (ideal)
Operating pressure (max.)*
Operating pressure (min.)*
Water temperature (ideal)
Water temperature (max.)
* Equal pressure is recommended.
Value
3 bar 45 PSI
5 bar 70 PSI
1 bar 14.5 PSI
60°C 140°F
70°C 158°F
– 5 –
EN
300 kPa
500 kPa
100 kPa