Inventum IVW6035A Manuel D'utilisation page 32

• Check whether the indoor electrical fuse system is connected
according to the regulations.
• All electrical connections must match the values of the rating
plate.
• If the mains cable is damaged, it can only be replaced by the
service organizations of the manufacturer or equivalent qualified
persons.
• Make sure that the appliance is not placed on the mains cable.
• Do not use an extension cable or a multiple socket for the
connection. The mains plug must be easily accessible after
installing the appliance.
• Do not excessively bend the water inlet and drain hoses or the
mains cable during installation. Make sure that the water inlet
and drain hoses or the mains cable do not become stuck.
• After installing the appliance, make sure that you run the
appliance without dishes for the first time.
POSITIONING THE APPLIANCE
• When determining the place of the appliance, make sure that
you choose a place where you can easily load and unload it.
• Do not place the appliance in a location where the room
temperature can be below 0°C.
• Place the appliance close to a water tap or drain and mains
socket. Keep in mind that the connections will not be changed
when they are made.
• Do not hold the appliance at the door or control panel to move it.
• Make sure that the water inlet and outlet hoses do not get stuck
while placing the appliance.
• Place the appliance in a safe and level location.
• Make sure that the appliance is level and balanced by adjusting
the feet. When the appliance is placed correctly the door opens
and closes easily.
32 • English