Menu Features And Functions - Telefunken L22F137D2 Mode D'emploi

For your viewing requirements, you can set the related mode option. Picture mode
Mode
can be set to one of these options: Cinema,Game,Dynamic and Natural.
Contrast
Sets the lightness and darkness values of the screen.
Brightness Sets the brightness value for the screen.
Sharpness Sets the sharpness value for the objects displayed on the screen.
Colour Sets the colour value, adjusting the colors.
To set Power Save Mode as Eco, Picture Off and Disabled. See the section,
Power Save
"Environmental Information" in this manual for further information on Power Save
Mode
Mode.
This setting controls the backlight level and it can be set to Auto, Maximum,
Backlight Minimum and Eco Mode. Backlight function will be inactive if Power Save Mode is
(optional) set to On. Backlight cannot be activated in VGA, Media Browser mode or while the
picture mode is set to Game.
If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting
Noise
to reduce the noise amount. Noise Reduction can be set to one of these options:
Reduction
Low, Medium, High or Off.
Dynamic
You can change contrast rate by using dynamic contrast function. Dynamic
Contrast contrast can be set to one of these options: Low, Medium, High or Off.
Colour Temp Sets the desired colour tone.
Picture Zoom
Sets the picture size to Auto,16:9, Subtitle,14:9, 14:9 Zoom, 4:3 or Cinema.
HDMI True While watching from HDMI source, this feature will be visible in the Picture Settings
Black(optional) menu. You can use this feature to enhance blackness in the picture.
Films are recorded at a different number of frames per second to normal television
Film Mode
programmes. Turn this feature on when you are watching films to see the fast motion
(optional)
scenes clearly.
Skin Tone Adjust the desired skin tone.
Colour Shift
Adjust the desired colour tone.
Press OK button to edit RGB gain. You can configure the colour temperature values
RGB Gain
using the RGB Gain feature.
Reset Resets the picture settings to factory default settings.
Autoposition
Automatically optimizes the display. Press OK to optimize.
(in PC mode)
H Position (in
This item shifts the image horizontally to right hand side or left hand side of the screen.
PC mode)
V Position (in
This item shifts the image vertically towards the top or bottom of the screen.
PC mode)
Dot Clock (in Dot Clock adjustments correct the interference that appear as vertical banding in
PC mode)
dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Depending on the resolution and scan frequency that you input to the TV set, you
Phase (in PC
may see a hazy or noisy picture on the screen. In such a case you can use this item
mode)
to get a clear picture by trial and error method.
While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings
will be added to the Picture Settings while in PC mode.

Menu Features and Functions

Picture Menu Contents
Advanced Settings
English - 29 -