Tv Menu Features And Functions - Telefunken L24H125A3 Mode D'emploi

TV Menu Features and Functions

Picture Menu Contents
You can change the picture mode to suit your preference or requirements. Picture mode
Mode
can be set to one of these options: Cinema,Game,Dynamic and Natural.
Contrast
Sets the lightness and darkness values of the screen.
Brightness Sets the brightness value for the screen.
Sharpness Sets the sharpness value for the objects displayed on the screen.
Colour Sets the colour value, adjusting the colors.
To set the Power Save Mode as Eco, Picture Off and Disabled.
Power Save
Mode
(When the Mode is Dynamic, Power Save mode is automatically set as disabled.)
This setting controls the backlight level. The backlight function will be inactive if the Power
Backlight
Save Mode is set to Eco. The backlight cannot be activated in VGA, Media Browser mode
(Optional)
or while the picture mode is set to Game.
Noise If the broadcast signal is weak and the picture is noisy, use the Noise Reduction
Reduction setting to reduce the amount of noise.
Advanced Settings
Dyanmic
You can change the Dynamic Contrast ratio to desired value.
Contrast
Colour Temp
Sets the desired colour tone.
Sets the desired picture size from picture zoom menu.
Picture Zoom
Note: Auto (Only available in Scart mode with SCART PIN8 high voltage/low voltage
switching)
Films are recorded at a different number of frames per second to normal television
Film Mode programmes. Turn this feature on when you are watching films to see the fast
motion scenes clearly.
Skin Tone Skin tone can be changed between -5 and 5.
Colour Shift
Adjusts the desired colour tone.
RGB Gain You can configure the colour temperature values using the RGB Gain feature.
Reset
Resets the picture settings to factory default settings.(Except Game Mode)
Autoposition
Automatically optimizes the display. Press OK to optimize.
(in PC mode)
H Position (in
This item shifts the image horizontally to the right hand side or left hand side of the screen.
PC mode)
V Position (in
This item shifts the image vertically towards the top or bottom of the screen.
PC mode)
Dot Clock (in Dot Clock adjustments correct the interference that appear as vertical banding in dot
PC mode) intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Depending on the resolution and scan frequency that you input to the TV set, you may
Phase (in PC
see a hazy or noisy picture on the screen. In such a case you can use this item to get a
mode)
clear picture by trial and error method.
While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode
settings will be added to the Picture Settings while in PC mode.
English - 25 -