Visual Eq; Visual Eq Setting Operation; Selecting The Visual Eq Mode (Maker's Setting); Adjusting Brightness - Alpine IVA-W203 Mode D'emploi

VISUAL EQ™

Visual EQ Setting Operation

The following steps 1 to 4 are common operations to each
"Setting item" of VISUAL EQ setting. Refer to each section for
details.
1
After steps 1 and 2 in "Display Setup Operation"
(page 37) have been performed, touch [
VISUAL EQ.
VISUAL EQ screen appears.
2
Select a desired setting item by touching [ ] or [ ].
Setting items:
VISUAL EQ* BRIGHT
CONTRAST SHARP*
* The setting is available in the visual source mode (except navigation
screen).
3
Change the setting on the selected item by touching
its [ ] or [ ].
4
Touch [RETURN] to return to the previous screen.
Touch and hold [RETURN] for at least 2 seconds to return to
the main source screen that was displayed before the setup
operation was started.
Selecting the VISUAL EQ Mode (Maker's
setting)
You can select a mode suitable for the subject image.
Setting item: VISUAL EQ
Setting contents: OFF (FLAT) / NIGHT M. / SOFT / SHARP /
CONTRAST / P-1 / P-2
OFF (FLAT): Initial Setting
NIGHT M.: Suitable for movies in which dark scenes
frequently appear.
SOFT: Suitable for CGs and animated films.
SHARP: Suitable for old movies where images are not
clearly shown.
CONTRAST: Suitable for recent movies.
P-1: Recalls the VISUAL EQ mode being stored on
preset No.P-1 from "Storing VISUAL EQ"
(page 40).
P-2: Recalls the VISUAL EQ mode being saved on
preset No.P-2 from "Storing VISUAL EQ"
(page 40).
• To return to the initial setting after selecting any one of the setting
contents (NIGHT M. to CONTRAST) and adjusting a desired
brightness, picture tint, etc., set this function to OFF.
• If your desired brightness, picture tint, etc., are adjusted after
selecting any one of the setting contents (NIGHT M. to CONTRAST),
"CUSTOM" is displayed.
] of
COLOR* TINT*
USER MEMORY*

Adjusting Brightness

Setting item: BRIGHT
Setting content: -15 ~ +15
You can adjust the brightness between MIN (–15) and MAX
(+15). When it reaches the minimum or maximum point, the
display shows "MIN" or "MAX" respectively.
• When any Visual EQ Preset is selected, the brightness is
automatically adjusted according to the car's interior lighting as
long as AUTO is set in "Setting the Brightness of the Backlighting"
(page 38).

Adjusting Color of Picture

Setting item: COLOR
Setting content: -15 ~ +15
You can adjust the color between MIN (–15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows "MIN" or "MAX" respectively.
• Color adjustment can be made only in the navigation, DVD, Video
CD, AUX modes.

Adjusting Tint of Picture

Setting item: TINT
Setting content: G15 ~ R15
Adjust the color from G15 to R15. "G MAX" or "R MAX" is
displayed at the maximum of each color.
• Tint adjustment can be made only in the navigation, DVD, Video CD,
AUX modes.

Adjusting Image Contrast

Setting item: CONTRAST
Setting content: -15 to +15
Contrast adjustment range is -15 to +15. "LOW" and "HIGH"
appear as the minimum and maximum values specified.
39
-EN