After Use; Switching The Appliance On - SOLIS Airwasher Qubic Mode D'emploi

STARTING UP
s
If the water tank is filled with fresh tap water and the appliance is correctly assem-
bled (water tub with humidification disks inserted, water tank installed) and con-
nected to the power, you can start using it.
1 . SWI TC HING THE AP PLIAN CE ON
;
Touch the button to activate the appliance. The display will state Hi!, followed
●
by SL for the slowest ventilation speed and CO for continuous humidification
GB power (default setting) and the current room humidity. The humidity switch
built into the appliance measures the air humidity directly at the appliance. A
humidity switch placed away from the appliance might display a different air
humidity value.
2 . C HOO S ING FU NCTION S
Choose the desired functions. Use the
●
and the button to set the desired air humidity. If desired, activate the timer
function or the night mode. The display will successively display all settings. The
cycle, into which the current air humidity is also included, is then continuously
repeated.
In general: The higher the room temperature is, the quicker the humidification
●
will be.
The appliance switches off automatically if the water tub is not sufficiently
●
filled with water. NO! is displayed in alternation with the three bars ■
appliance switches off (please refer to the section "Water shortage display" on
page 89).
Before refilling the appliance with water, please always switch the appliance off
●
;
with ON/OFF button first. Then, tilt the rear top section of the appliance with
the inlying water tank outwards and lift it off. Now, the water tank can be filled
with fresh water.
90
button to set the ventilation speed
. The
■ ■
■ ■

AFTER USE

s
If you wish to switch the appliance off completely, always touch the ON / OFF
●
;
button first and then disconnect the power plug from the power outlet.
If you do not wish to use the appliance for 2 days or more, we recommend
●
pouring out the water in the water tub and the water tank and drying the
water tub with a dry towel as well as letting the humidification disks air-dry in
the open appliance.
In general, we recommend pouring away the water remaining in the
●
water tub before filling it with new water.
Important: Always remove the humidification disks before pouring away
●
the water.
GB
91