Publicité
Les langues disponibles
Les langues disponibles
SETTINGS
Turn the "Functions" knob indicator to the symbol
changed.
Clock
Turn the "Functions" knob to the symbol
previous paragraph (SETTING THE TIME).
Eco
With the ECO mode selected (ON), the display switches off when the oven is on standby or 5 minutes after the end of cooking.
To view information on the display, simply press a button or turn a knob.
1.
Turn the "Browse" knob to display "ECO".
2.
Press
to access the setting (ON/OFF).
3.
Turn the "Browse" knob to select the desired setting and confirm by pressing button
Acoustic signal
To activate or deactivate the acoustic signal, proceed as follows:
1.
Turn the "Browse" knob to display "SOUND".
2.
Press
to access the setting (ON/OFF).
3.
Turn the "Browse" knob to select the desired setting and confirm by pressing button
Brightness
To change the display brightness, proceed as follows:
1.
Turn the "Browse" knob to display "BRIGHTNESS".
2.
Press button
: number 1 appears on the display.
3.
Turn the "Browse" knob to increase or decrease brightness and confirm by pressing
AUTOMATIC OVEN CLEANING
For the description of this function, see the chapter CLEANING and the functions table at page 12.
To activate the oven's automatic cleaning cycle (pyro-cleaning), proceed as follows:
1.
Turn the "Functions" knob to symbol
2.
Press button
to confirm your choice and start the pyro-cleaning cycle.
To select ECO pyro-cleaning, turn the "Browse" knob: the word ECO appears bottom right on the display. Press button
the shorter programme.
During pyro-cleaning, the oven door is automatically locked and the symbol
at the end of the cleaning cycle: "COOL" appears on the display, indicating the oven is still cooling down. When the oven cools
to a safe temperature, the symbol
KEY-LOCK
This function can be used to lock the buttons and knobs on the control panel.
To activate it, press
and
are locked and the display shows a key symbol. This function can also be activated during cooking. To deactivate it, repeat the
above procedure. When the key-lock function is activated, the oven can be switched off by turning the knob to 0 (zero). In this
case, however, the previously selected function will have to be set again.
to access a submenu containing four display settings which can be
: the word CLOCK appears on the display. To change the time of day, see the
: the word PYRO appears on the display.
switches off and the display shows "END".
at the same time for at least 3 seconds. When activated, the functions associated with the buttons
appears on the display. The door remains locked
GB11
.
.
.
to start
Publicité
