Perel SOL9 Mode D'emploi page 4

•
•
•
•
•
3. Overview
Refer to the illustrations on page 2 of this manual.
4. Mounting
Solar Panel
•
•
Lamp
•
•
•
•
Remember to mount the panel and the lamp within each other's
reach, i.e. the length of the cable (± 2.5 m).
V. 03 – 27/11/2019
Nor Velleman nv nor its dealers can be held responsible for
any damage (extraordinary, incidental or indirect) – of any
nature (financial, physical...) arising from the possession,
use or failure of this product.
Keep this manual for future reference.
Regularly wipe the device with a moist, lint-free cloth. Do
not use alcohol or solvents.
The base of the lamp is equipped with magnets and should
never be placed close to monitors, credit cards, etc.
Refer to the Velleman
last pages of this manual.
1 solar panel
2 solar panel mount
3 LED lamp
4 power input
Choose a sunlit mounting area. Fix the panel to the surface
with the included screws. Use an appropriate screwdriver.
The panel can be rotated over 360° and tilted to maximize
its sun exposure.
Choose an appropriate mounting area. Measure the distance
between the screw slots. Mark the distance onto the
mounting surface.
Drill holes using an appropriate power drill and insert a
screw into each hole. Insert a nylon plug (not incl.) if
necessary.
Secure the lamp to the screws.
The lamp can also be fixed to a metal surface without using
the screws thanks to the magnetic base.
SOL9
® Service and Quality Warranty on the
5
6
7
8
4
power supply plug
on/off switch
built-in magnets
mounting slots
©Velleman nv