Kränzle K 1050 TS T Manuel D'utilisation Original page 41

Putting into operation
Prior to insertion, check plug coupling connection of lance for cleanliness
(sand, dirt ..) and use clear water to clean, if necessary.
Impurities may damage the sealing in the plug coupling.
5. Unwind high pressure hose straight and
without nooses. Completely unwind
hose. (When using hose extensions take
care that the max. length of 20 m is not
exceeded!)
6. Push on high pressure hose to trigger
gun with safety catch.
7. Tightly screw together high pressure
hose and trigger gun with safety catch.
8. First pull back the retaining sleeve of
the gun, then insert lance into the
plug coupling connection of the gun.
9. After insertion of the lance, release reta-
ining sleeve and make sure that the lance
is in a secure position.
GB
41