Indesit XWDE 751680 Mode D'emploi page 24

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Push&Wash+Dry
GB
This function makes it possible to start an automatic wash and drying cycle either when the machine is off without having to
press the ON/OFF button in advance, or after switching on the machine without having activated any button and/or selector
(otherwise the Push&Wash+Dry function will be deactivated). To start the Push&Wash+Dry cycle press and hold the button
for 2 seconds. The indicator lights up to show that the cycle has started. The wash and drying cycle is ideal for cotton or
synthetic fabrics, as it washes them at a temperature of 30° and a maximum spin speed of 1000 rpm. During the drying
cycle the maximum temperature is 60°C. At the end of the cycle the residual humidity will be the same as for the "
" level.
Max recommended load 2,5 kg.
The time displayed is the maximum time allowed by the Push&Wash+Dry cycle. If the load is lower than the maximum load
or most garment are made of synthetic materials, the actual time of the cycle will be shorter.
How does it work?
1. Load the laundry (cotton and/or synthetic garments) and close the door.
2. Pour the detergent and/or additives.
3. Start the cycle by pressing and holding the Push&Wash+Dry button for 2 seconds. The relevant indicator light will turn
green and the door will lock (the DOOR LOCKED symbol is lit).
NB: starting the cycle through the Push&Wash+Dry button activates an automatic non-customisable wash and drying cycle
recommended for cotton and synthetic fabrics.
4. The automatic cycle can be used only for washing, excluding the drying phase. Press the Push&Wash+Dry button and
then the drying button
: the drying icon of the "
" level will switch off. Maximum load for washing-only is 3,5 kg. The
cycle cannot be customised further.
To open the door while an automatic cycle is under way, press the START/PAUSE button. If the DOOR LOCKED symbol is
off, the door may be opened only during the washing phase. Press the START/PAUSE button again to restart the wash cycle
from the point at which it was interrupted.
5. At the end of the wash cycle the word END will light up.
24

Publicité

Chapitres

Table des Matières
loading

Table des Matières