20
3
Storage side panel
21
1
Storage top panel
22
1
Storage bottom panel
23
1
Wire cover (sauna stove)
24
1
Interior floor panel
25
1
entrance step
26
2
Door handle
27
1
Wire cover
28
1
Control box
29
60
Rain coat (gray)
30
2
Asphalt shingle (grey)
31
1
Water nose
32
1
Top filling slat (13mm)
33
1
Top filling slat (16mm)
34
1
Top filling slat (34mm)
Read the assembly instructions carefully before starting.
Choice of location
Holl's saunas are designed solely for exterior installation.
Select a space:
•
In a dry area, on a flat stable surface that can support the weight of your sauna.
•
The height must be sufficient for you to reach the ceiling and carry out electrical connections and maintenance.
•
Away from any source of water, flames or flammable materials.
Practical advice
•
Note that sauna assembly requires 3 adults.
•
Clearly identify each panel before you begin
•
During assembly, position your sauna's mains cable so that it is easily accessible.
•
Note that there are variations between the models.
•
IMPORTANT:
•
Please check the countersink and hole diameter of the drill holes to avoird damaging the wood.
•
The minimum room height required for installation is 2020 mm.
Tools needed
20
Installation
Screwdriver
Pencil
2 Spanner
(19 mm)
Wood spiral drill
Included accessories:
Tape measure
Cutter
Electric
screwdriver
Allen Wrench
Step ladder
Mallet