Publicité
Les langues disponibles
Les langues disponibles
2. ATTACH ENCLOSURE END AND zIPPER DOOR PANELS
When securing enclosure panels to corner legs, note that each bungee is shared with the neighboring panel.
NOTE: Door panels zippers must be closed when securing door panel.
3. TIGHTEN THE COvER WITH TWIST TITE
A. Wrap the cord with plastic ball and "S" hook at the corners of the cover around the
corner leg poles. Insert "S" hook into the hole of the corner leg poles.
B. Twist each leg pole toward the inside of the shelter until the cover becomes tight
Twist the leg poles equally to ensure the cover stays aligned during tightening.
Interior / Rear view of Canopy Enclosure Panels
Side Wall
Panel
™
Page 4
Back Panel
One bungee for
both panels.
Twist-Tite
™
Tighten Cover
05_25174_25774_0D
Publicité
