Domo DO7285S Mode D'emploi page 45

www.domo-elektro.be
forward and pull out the bottom part of the tube to make it longer. Release the
slide button and let the tube snap into place.
3. Attach the floor nozzle to the telescopic tube by firmly sliding the tube into the
nozzle.
1
Accessories
1. Crevice nozzle: for hard to reach areas
like radiators, crevices, corners, in between
pillows,...
2. Dust brush: for furniture, shelves,...
3. Parquet brush: for parquet floors and other
delicate floors
USE
1. Unwind the cord to a substantial length and plug in the vacuum cleaner. The
yellow label on the cord indicates the maximum length of the cord, that should
not be exceeded.
2. To turn the vacuum cleaner on and off, press the foot pedal with the
3. To set the suction power, slide the suction power button to the left or right in
between the MIN and MAX indicators. For delicate materials it is best to use the
minimum power level, a medium power is recommended for matresses, furniture
and carpets and the maximum power level should be
used for tiles, wood and other hard floors.
4. When you want to clean hard floors, make sure that
the brushes in the floor nozzle are down. (A)
5. When you want to clean carpet, make sure that the
brushes in the floor nozzle are retracted. (B)
6. When you have finished vacuuming, unplug the
vacuum cleaner and automatically rewind the cord
by pressing the foot pedal with the
not whip back and forth while rewinding the cord, by guiding the cord with your
hand. This to prevent possible damage.
2
3
symbol. Make sure that the plug does
45
DO7285S
3
2
symbol.
A
B
1