Domo DO7285S Mode D'emploi page 44

DO7285S
PARTS
14
1. Floor nozzle
2. Button to pull out or retract brushes
3. Slide button to set length of tube
4. Telescopic tube
5. Hose
6. Connection for hose
7. Handle
4
8. Handle lid dust bag compartment
9. Full dust bag indicator
10. Button for automatic cord rewinding
11. Button to set the suction power
3
12. On/off button
13. HEPA filter under the grid
14. Additional suction power control
5
11
10
6 13
7 8
9 12
1
2
ASSEMBLY
Always unplug the vacuum cleaner before (dis)assembling any parts.
Hose
Assembly: Put the connection ring at the end of the hose
into the hose connection in the vacuum cleaner and turn to
the right so that it is locked into place.
Disassembly: Unplug the vacuum cleaner. Turn the
connection ring at the end of the hose to the left and remove
from the hose connection.
Telescopic tube
1. Put the handle of the hose into the telescopic tube.
2. Set the telescopic tube to the desired length. To do this, push the slide button
44