Franke FMPOS 608 BI X Manuel D'utilisation page 8

• Clean the hood using a damp cloth
and a neutral liquid detergent.
Controls
B0 B1
When the dial is turned clockwise the speed
increases, passing from:
OFF-1-2-3-INTENSIVE (B1).
The base of the dial will become brighter as
the speed changes.
Turning the dial clockwise and holding it for about
2 sec. activates the DELAY function.
The motor and lights switch off automatically
after 10 min. When the DELAY function is active,
the base of the dial flashes.
This function cannot be activated if INTENSIVE
speed is active.
Press the dial briefly to turn the lights on/off at
maximum intensity (B2).
Press and hold the dial for approximately 2 sec.
to turn the lights on/off at intermediate level.
When the dial is turned anticlockwise the speed
decreases, passing from:
INTENSIVE-3-2-1-OFF (B0).
Turning the dial anticlockwise and holding it for
about 2 sec. switches the motor off.
8
Z
B2
Lighting
• For replacement contact technical
support ("To purchase contact
technical support").
Light on.
Only speed one and
Motor Off can be
activated.
Light on.
Speed one, speed two
and Motor Off can be
activated.
Light on.
Speeds one, two and
three and Motor Off can
be activated.
Light on.
Speeds one, two,
three, Intensive speed
and Motor Off can be
activated.