Craftsman CMXPTSG1007NB Guide D'utilisation page 6

WARNING
RISK OF PERSONAL INJURY
What can happen
A tool left unattended or with the air hose attached can be
activated by unauthorized persons leading to their injury
or injury to others.
Air tools can propel fasteners or other materials
throughout the work area.
Air tools can become activated by accident during
maintenance or tool changes.
Air tools can cause the workpiece to move upon contact,
leading to injury.
Loss of control of the tool can lead to operator injury or
injury to others in the work area.
How to prevent it
Remove air hose when the tool is not in use and store tool
in a secure location away from reach of children and
untrained users.
Use only parts, fasteners and accessories recommended by
the manufacturer.
Keep work area clean and free of clutter.
Do not allow children to operate tool, and keep children
away from the work area.
Keep work area well lit.
Securely fit the socket or attachment to the impact wrench.
Inspect anvil and retaining ring of tool prior to use. Missing
or damaged items should be replaced before use.
Keep bystanders a safe distance away from work area.
Anyone entering the work area must wear personal
protective equipment.
Fragments of workpiece or of a broken accessory may fly
away and cause injury beyond immediate area of
operation.
Disconnect the tool from the air supply during accessory
changes, tool changes, maintenance or repair.
Never carry the tool by the air hose.
To avoid unintentional operation, never carry the tool with
the trigger depressed or engaged.
Only an authorized service representative should service
the tool.
Always make sure the workpiece is secure. Use clamps or
other devices to prevent movement.
Before changing accessories, making repairs, or when tool
is not in use, shut off the air supply and release/drain air
pressure from hose.
Disconnect tool from air supply and store in a safe location.
Never use the tool while using medications, drugs or
alcohol.
ENGLISH
5