Husqvarna 324LX- Série Manuel D'utilisation page 42

Warm engine
Ignition: Set the stop switch to the start position.
Choke: Put the choke in working position.
Primer bulb: Press the air purge repeatedly until fuel begins
to fill the bulb. The bulb need not be completely filled.
WARNING! When the engine is started with
!
the choke in either the choke or start
throttle positions the cutting attachment
will start to rotate immediately.
Starting
Hold the body of the machine on the ground using your left
hand (CAUTION! Not with your foot!). Grip the starter
handle, slowly pull out the cord with your right hand until you
feel some resistance (the starter pawls grip), now quickly
and powerfully pull the cord. Never wrap the starter cord
around your hand
Reset the choke when the engine fires, repeat pulling the
cord until the engine starts.
CAUTION! Do not pull the starter cord all the way out and
do not let go of the starter handle when the cord is fully
extended. This can damage the machine.
42 – English
STARTING AND STOPPING
Stopping
Stop the engine by switching off the ignition with the stop
button.