Preparation
Read the notes on page 17 before attaching the digital camera.
Check that the digital camera is set to [OFF].
≥
Remove the strap and silicon jacket from the digital camera.
1
Push 2 up with your finger while sliding 1 to open the buckle.
2
Attach the digital camera to the Case.
Be careful of the direction and insert the digital camera into the Case
as shown in the illustration.
≥
Check that there is no remaining water inside the digital camera and the Case.
≥
Be careful not to catch the shading hood 1.
3
Insert the silica gel (supplied).
≥
Always use new silica gel.
-Attaching the Digital Camera-
Front Case
Silica gel
Digital Camera
15
VQT3M30