Fagor PL-2400C Manuel D'utilisation page 7

ENVIRONMENT
At the end of its working life, the
product must not be disposed
of as urban waste. It must be
taken to a special local authority
differentiated waste collection
centre or to a dealer providing
this service.
Disposing of a household appliance
separately avoids possible negative
consequences for the environment and
health deriving from inappropriate disposal
and enables the constituent materials to be
recovered to obtain significant savings in
energy and resources.
To remind you that you must collaborate with
a selective collection scheme, the symbol
shown appears on the product warning
you not to dispose of it in traditional refuse
containers.
For further information, contact your local
authority or the shop where you bought the
product.
1. DESCRIPTION
1. Spray.
2. Water inlet cover.
3. Steam regulator.
4. Steam button .
5. Steam button (vertical ironing).
6. Indicator light.
7. Water deposit.
8. Temperature selector.
9. Auto-cleaning.
10. Base.
2. TECHNICAL DETAILS
Voltage / Frecuency: 220-240V~50Hz.
Power: 2200-2400 W (PL-2400C).
2000-2200 W (PL-2200X).
Tank volume: 280 ml.
This product complies with European
Directives for Electromagnetic Compatibility
and Low Voltage.
3. OPERATING THE APPLIANCE
• W ith the iron switched off, raise the water
cover and fill the deposit.
The MAX quantity is about 280 ml.
• C heck the label of the garments to
be ironed: fabric and recommended
temperature.
• W ith the iron in vertical position, adjust
the temperature selector to the desired
position.
• T he red indicator light will come on. Wait
until the temperature is reached.
• A djust the steam regulator between MIN
and MAX.
• U se the adequate stem button for either
horizontal or vertical ironing.
• P ress the auto-clean button every
10-15 days to clean impurities.
• A fter each use, switch off the device
and wait until the iron has cooled before
emptying the water deposit, cleaning it
and storing it.
You can find further information of how your
iron works at www.fagor.com.
Caution!
Do not touch the surfaces marked
with the " " symbol during or
immediately after use. They are
very hot!
EN
5