Ibiza Light PAR-TRUSS-BAT Manuel D'utilisation page 5

4.2 Menu map
Press the <MODE/ESC> button repeatedly until you reach the desired menu function. Use the <UP> and <DOWN>
buttons to navigate the menu options. Press the <ENTER> button to select the menu function currently displayed or
to enable a menu option. To return to the previous option or menu without changing the value, press the
<MODE/ESC> button. After a few seconds, the LED Display will back during operation until another button is pressed.
1. Auto Mode
Press MENU button until AUTO is displayed. Press ENTER. The unit runs through the built-in programs. You can set
the speed and strobe value in Shou Mode.
2. Shou Mode
Press MENU button until Shou is displayed. Press ENTER. The unit contains a total of 6 built-in programs Sh01 ~ Sh06
that are selected by pressing the UP or DOWN keys. Press ENTER button and set the effect speed between SP01 ~
SP99. Press ENTER and set the strobe speed from St00 ~ St99. Press ENTER to save the setting.
Sh01 RGBW Single color gradual change
Sh02 Multicolor gradual change
Sh03 Effect 1
Sh04 Effect 2
Sh05 RGBW Single color jump change
Sh06 Multicolor jump change
3. Soud Mode
Press MENU button until Soud is displayed. Press ENTER. In Sound mode, the unit will work to the rhythm of the
music. Press ENTER and set the sensitivity of the mic from Sen ~ Sen9.
4. dmX Mode
Press MENU button until dmX is displayed. Press ENTER. Press UP or DOWN keys to set the DMX address d001 ~
d512. Press ENTER to set the channel mode. This product offers three channel modes: 4 CH, 6 CH & 8 CH. The
specifications are detailed in the following chapter.
DMX Channel Modes, Assignments and Values
4-Channel
CHS
CH1
CH2
CH3
CH3
6-Channel
CHS
CH1
CH2
CH3
CH4
CH5
CH6
©Copyright LOTRONIC 2017
Function
RED
GREEN
BLUE
WHITE
Function
DIMMER
STROBE
RED
GREEN
BLUE
WHITE
Value
0~255
0~255
0~255
0~255
Value
0~255
0~255
0~255
0~255
0~255
0~255
PAR-TRUSS-BAT Page 5