Fagor LFA-019 IX Guide D'utilisation Et D'entretien page 9

DOOR
There is a useful template
with the assembly
instructions.
h Using the terminal strips
supplied, raise the height
of the control panel to
reach the height of the
furniture drawer.
Fit the corresponding
i
template (J-120:K-110),
fasten it down and mark
the position of the holes.
Drill, using a Ø 1,16" bit
j
and screw in the supports
(part which curves
upwards) to the
decorative door.
Take the Decorative Door
k
and slide the supports
into the door slots. Pull
up until touching the
control panel making sure
that it has been properly
fixed down.
Open the dishwasher
l
door slowly holding the
decorative door and
finally fix it with the screws
taking care to align the
panel with the door.
h
j
l
I M P O R TA N T
The maximum and minimum weight which is recommended
for the decorative door to be fitted on the dishwashers is:
Maximum 14 lb. Minimum: 6,5 lb.
English
i
k
9