Fagor LFA-019 IX Guide D'utilisation Et D'entretien page 20

When the dishwasher is
in operation and ...
- You wish to put an extra
plate in the dishwasher.
- You wish to change the
wash program
7
END OF PROGRAM
Once the program has
finished, the End light will
come on and a
continuous beep sounds
for 3 seconds.
8
POWER CUTS
If there is a power cut,
when the power comes
back on the dishwasher
9
BASIC RECCOMMENDATIONS
There are a series of issues which must be taken into consideration to help your dishwasher last
longer and wash better.
Fill the dishwasher. Try to make the most of the dishwasher capacity and so reduce
a
water and electricity consumption and lead to quieter operation.
Position the dishes properly. For optimum wash quality, the water spray arms must
b
turn freely without obstacles. In the same way, the pieces must be correctly positioned for
the water jet to reach them.
c
Choice of program. Choose the wash program and the additional functions properly,
according to your needs.
Cleaning. Clean the filters and the water spray arms every three months. Also make sure
d
that they are correctly refitted.
1. Press the Pause button.
2. Put the item in the
dishwasher and/or
change the wash
program.
3. Press the Start button.
I M P O R TA N T
Please take into consideration that the Start / Pause button
is different to the ON / OFF button.
If you press the ON / OFF
you must reprogram the dishwasher.
will continue its normal
operation from the point
where it was stopped (it
Except if the change
interferes in the duration of
the selected wash program
or is the delay option. They
you should press the
ON/OFF button (
change its status.
button during the wash process,
has a minimum memory
of 12 hours, depending
on the model).
), to