Faber FCH 95 BK KL Manuel D'utilisation page 13

Press .
Press and hold again for 3 seconds.
The key starts flashing.
Press and hold : the digits in the cooking area indicate
Hold and start pressing the digit of the cooking areas in clockwise order starting from the left front one.
The rear left digit alternately indicates
The front left digit indicates a number which depends on the parameters indicated in the selection.
Select the digits and a number on the power bar to access the settings menu and enter a value.
See the following table for the specifications:
Description
Menu code
Key sound volume control menu. 0 - Sound disabled
U2
Countdown beeper volume control
U3
menu.
Display brightness level control
U4
menu.
Countdown display control menu. 0 - Countdown display disabled
U5
U6 Pan detection menu.
Countdown
U7
menu.
Menu to activate Hob-Hood
U9
Coupling.
Once the correct value has been entered, confirm by touching and holding
To exit the menu without saving, press
If no operation is carried out the user menu will close after 1 minute.
2
1
and a number from 2 to 9 indicating the menu code.
Value
1 - Min.
3 - Max.
0 - Sound disabled
1 - Min.
3 - Max.
0 - Max.
9 - Min.
1 - Countdown display enabled
0 - Enabled
1 - Disabled
end management 0 - Continuous flashing and shut-down
1 - Ten flashes and shut-down
2 - One flash and shut-down
0 - Hob-Hood Coupling disabled.
1 - Activate Hob-Hood Coupling procedure. The display shows an anima-
tion.
CAUTION: once the procedure has been activated, refer to the hood
manual and check that the K-Link Coupling procedure has been activated.
The coupling procedure takes 2 minutes.
.
.
3
4
5
for 2 seconds.
13