Intended Use; Exclusion Of Liability; Safety Instructions - SIKA P700.2 Manuel D'utilisation

Safety instructions

1.1 Intended use

The P700.2 hand pump can only be used for generating pressure in low-volume measuring
devices. The device is only designed for use with hydraulic oil or demineralised water, other
media will result in damage to the hand pump.
The hand pump may not be attached to external pressure sources.
WARNING! No safety component!
The hand pump of the series P700.2 is not safety component in accordance with Directive
2006-42-EC (Machine Directive).
 Never use the P700.2 as a safety component.
The operational safety of the device supplied is only guaranteed by intended use. The speci-
fied limits ( § 9: "Technical data") may under no circumstances be exceeded.
CAUTION! No pressure build-up at too high viscosity!
If the viscosity of the hydraulic oil (variety, temperature) is too high, the function of the
hand pump is not guaranteed. A pressure build-up is not possible..
 Pay attention to the recommended viscosity of 11 cSt (maximum of 22 cSt at 15...60 °C).
CAUTION! Risk of injury or material damage!
By connecting the P700.2, the measuring device is hydraulically connected to the hand
pump. If the pressure relief valve is opened, a compressed medium can flow through the
pressure hose into the hand pump's storage container. At sufficiently large volumes, the
reservoir may overflow.
 Never connect the P700.2 directly to the hydraulic system with large volumes (con-
struction machines, etc.) or an aggressive medium (such as brake liquid).
Before ordering and installation, check that the hand pump is suitable for your applications.

1.2 Exclusion of liability

We accept no liability for any damage or malfunctions resulting from incorrect installation,
in-appropriate use of the device or failure to follow the instructions in this operating manual.
2 Safety instructions
Before you install the P700.2, read through this operating manual carefully. If the instruc-
tions contained within it are not followed, in particular the safety guidelines, this could result
in danger for people, the environment, and the device and the system it is connected to.
The P700.2 corresponds with state-of-the-art technology. This concerns the accuracy, the
operating mode and the safe operation of the device.
In order to guarantee that the device operates safely, the operator must act competently and
be conscious of safety issues.
- 26 - © SIKA • Ba_P700.2 • 01/2014
P700.2