Inserting Storage Media - Kompernass WK 8 A2 Mode D'emploi

Inserting storage media

NOTICE
► Since the camera has no built-in memory, it can only work if an
microSDHC memory card
► The device supports microSDHC memory cards with a capacity
of up to 32 GB.
► Use a microSDHC card with a speed rating of 10.
Using memory cards with a speed rating of less than 10 can
lead to picture errors during recording.
CAUTION
► To avoid malfunctions, keep the memory card away from
moisture and avoid strong vibration, dust, heat sources and
direct sunlight.
► Insert the memory card as indicated by the icon on the slot.
Never force the memory card into the slot. Never bend or twist
the memory card.
► After transport, wait until the memory card has reached ambi-
ent temperature before using it for the first time. Major fluctua-
tions in temperature or humidity can lead to condensation
which could cause an electrical short-circuit. Keep the memory
card in the storage box
♦ To insert a microSDHC memory card into the memory card slot
of the device, push it into the slot until it clicks into place. The
electrical contact of the memory card must be facing towards the
front of the camera.
♦ To remove a microSDHC memory card
17
slot of the device, press the protruding edge of the memory
card in a little way until it pops out. Then remove the memory card.
│ GB │ IE
■ 62
34
is inserted.
32
.
34
from the memory card
WK 8 A2
17