Installation - Toshiba Carrier MMD-AP0304H2UL Manuel D'installation

4

Installation

WARNING
• Install the air conditioner certainly at a place to sufficiently withstand the weight.
• If the strength is insufficient, the unit may fall down resulting in human injury.
• Perform a specified installation work to guard against an earthquake.
• An incomplete installation can cause accidents by the units falling and dropping.
External dimensions
E
Air discharge port
7-EN
Hole for hanging bolt
4-Ø0.5"(12) x 3.6"(92)
1.6" (40)
(Hanging bolt mounting pitch)
B
3.8"
C (96)
Flange
Entering of power supply and
Electrical control box
communication wires
Refrigerant pipe connecting port
(Gas side Ø5/8" (15.9))
CAUTION
Strictly comply with the following rules to prevent damage of the indoor units and human injury.
• Do not put a heavy article on the indoor unit or let a person get on it. (Even units are packaged)
• Carry in the indoor unit as it is packaged if possible. If carrying in the indoor unit unpacked by necessity, use buffering
cloth or other material to not damage the unit.
• To move the indoor unit, hold the hooking brackets (4 positions) only.
Do not apply force to the other parts (refrigerant pipe, drain pan, foamed parts, resin parts or other parts).
• Carry the package by two or more persons, and do not bundle it with plastic band at positions other than specified.
• To install vibration isolation material to hanging bolts, confirm that it does not increase the unit vibration.
Model MMD-
AP030, AP036
AP048
27.6" (700)
29.1" (740)
Refrigerant pipe connecting port
26" (660) (Liquid side Ø3/8" (9.5))
6.4"
(163)
4.1" 2.4"
(105) (60)
4.3"
Air suction port
(110)
Drain pipe connecting port (VP25)
(Male screw)
– 4 –
Unit: in (mm)
A B C D
31.5" (800) 33.5" (850) 26.5" (672) 20.7" (526)
41.7" (1060) 47.2" (1200) 30.4" (772) 34.5" (876)
D
Flange
E
3.4" (87)
8.3" (212)
EN
8-EN