Austro Flamm Clic Pellet Notice D'utilisation page 20

20
Start of your Clic Pellet
TURNING KNOB during START UP
„BURNING MODE" after the START UP
After the START UP the display does show:
Lighted Performance area, permanently green Flame.
OPERATING MANUAL
Move the TURNING KNOB
clockwise from the START POSI-
TION to the END POSITION. Your
CLIC starts : The Flame Symbol
on the right side starts blinking
green. The display lighters bright
white. That indicates, the stoves
is in the START UP MODE. The
START UP does work complet-
ly automatic. During the START
UP the pellets get ignited. The
Fire Chamber gets heated up to
operation temperature. The AU-
TOMATIC START UP does last
approximately 20 minutes.
After fi nishing the AUTOMATIC
START UP the green blinking
fl ame turns into a permanent
green lightning fl ame. Now
your Clic will operate at the set
HEATING PERFORMANCE.
Recommendation
Let the stove burn after the
AUTOMATIC START UP for mi-
nimum of 30 minutes on POW-
ER 5. POWER 5 does heat up
the FIRE CHAMBER to more
than 400°C. This temperature
is needed to get the ceramott
inside clean and white.
ENGLISH