Télécharger Imprimer la page

Fulgor Milano F3RK24 Série Instructions D'installation page 7

Masquer les pouces Voir aussi pour F3RK24 Série:

Publicité

Les langues disponibles

Les langues disponibles

Step 2
Place a towel or table cloth onto the counter top. Lay
the cooktop upside down onto the protected surface.
TABLE CLOTH
)LJXUH 
Step 3
A foam tape is provided to seal the cooktop edges to
the countertop.
Apply tape approximately 1/16" (1.5 mm) from the
glass edge to the underside of the cooktop glass. Use
tape around the entire glass perimeter. Cut off excess
where tape ends butt.
COOKTOP GLASS
Figure 7
Step 4
Insert the cooktop centered into the cutout opening. Make
sure the front edge of the counter top is parallel to the
FRRNWRS 0DNH ¿QDO FKHFN WKDW DOO UHTXLUHG FOHDUDQFHV DUH
met.
BURNER BOX
BURNER BOX
FOAM TAPE
SEAL
Figure 8
Step 5
Four clamp brackets are provided to clamp the cooktop to
the countertop. Tighten screws just enough to hold brackets
in place when cooktop is put into cutout. Tighten screws
securely.
)LJXUH  0RG ´´
)LJXUH E 0RG ´
Installation Manual
ENGLISH
7

Publicité

loading

Ce manuel est également adapté pour:

F3rk30 sérieF3rk36 sérieF3rk24s2