Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
NB-IoT PULSE - Guide utilisateur / User guide version V1.0.0
3.
REGISTERS AND FRAME DESCRIPTION
To know the content of the registers and of each frames (uplink and downlink) of the product, re-
fers to the TECHNICAL REFERENCE MANUAL of the PULSE product, available on the adeunis website:
https://www.adeunis.com/en/produit/pulse-impulse-interface/
4.
CONFIGURATION AND INSTALLATION
FR
To configure the product, it is recommended to use the IoT Configurator (android and Windows appli-
cation).
- Google Play :
https://play.google.com/store/apps/details?id=com.adeunis.IoTConfiguratorApp
- Windows 10:
https://www.adeunis.com/telechargements/
To configure the product using AT Command or to know the radio recommendations, please refers to
EN
the INSTALLATION GUIDE adeunis® available on the website.
4.1. NB-IoT parameters configuration
To be able to reach the NB IoT network and to enable the communication of the device, a NB IoT SIM
card should be introduced. The device must be configured with the network and servers information.
To do so, use the "network configuration" section of the IoT Configurator.
Some SIM card can be compatible for several operators or several countries (example: Vodafone), in
this case it is mandatory to configure the following parameters:
•
the geographic zone where the device is installed
•
the MCCMNC code of the local operator
The list of the MCCMNC codes of the operators can be find here:
https://www.msisdn.net/list-of-mcc-mnc/
Fill the following information:
•
the APN code given by the operator
•
The IP address (or domain name) of your server
•
the server port on which the device will communicate
•
the local port of the device on which the server will
send the downlink
Page
52
of 56
Publicité
Table des Matières
