Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
NB-IoT PULSE - Guide utilisateur / User guide version V1.0.0
1.
PRODUCT PRESENTATION
IMPORTANT NOTE: the NB-IoT PULSE can be started using a magnet or changing is running mode in
the IoT Configurator.
Description
• NB-IoT PULSE is a ready to use radio transmitter that can be used to transform any type of meter
into a wireless meter (smart meter).
• This product meets the needs of users who require to remotely monitor the consumption of differ-
ent fluids (water, gas, electricity, heat ...) or any other phenomenon with an impulse interface (rain
gauge, odometer ...).
• The use of the NB-IoT protocol allows the user to integrate the NB-IoT PULSE into any network that
is already deployed.
• Two 3 wires-meters or one 5 wires-meters may be controlled by a single NB-IoT PULSE transmitter
thus permitting a significant reduction in implementation and deployment costs.
• The product emits the data from the meters periodically with or without history. It allows also the
detection of tamper, and leakage, and the flow calculation with transmission possibilities on exceed-
ing high or low thresholds.
• The configuration of the transmitter is accessible by the user via a micro-USB port or remotely via
the NB-IoT network, allowing in particular a choice of modes of transmission, periodicity or trigger-
ing thresholds.
• The NB-IoT PULSE is powered by replaceable double-battery pack.
IMPORTANT NOTE: The NB-IoT PULSE can transmit measurements from the meters but does not power
them.
Package composition
The product is supplied in a cardboard package containing the following elements:
• Upper case, electronic board, case plat and 2 torw screw 10.
• Compression gland with nut and 2 compression seals.
1.1. General description
Casing base
Antenna
2 holes for
passing col-
lars through
4 fastening
holes
Rail-DIN un-
locking lever
FR
EN
Cables outlet
packing gland
Page
37
of 56
Publicité
Table des Matières
