Indicators On Lcd "Fig. 2 - Ferroli DIAMANT Série Manuel De L'utilisateur

DIAMANT

Indicators on LCD "fig. 2 -"

1. ON/OFF display Displayed by pressing the ON/OFF button. Press the ON/OFF button again to remove If present this icon indicates
2 1
that you have set the power-up.
2. Transmission Indicator . This transmission indicator lights when remote controller transmits signals to the indoor unit.
3. Mode display. Displays the current operation mode. Includingauto (
to auto ( )..
4. Fan speed display. Displays the selected fan speed: high (
3
The fan speed is AUTO when the operating mode is either AUTO or DRY.
5. Temperature/Timer viewer. The temperature setpoint (17°C~30°C, 1°C increments) is shown in this part of the display. If the "FOL-
LOW ME" mode is activated, after a few seconds the measured temperature is shown, and the "Set Temp" icon disappears. When
using the air conditioner in "FAN" mode, temperature is not shown. When activating the "TIMER ON" or "TIMER OFF" functions, the
timer setting is shown for a few seconds instead of the temperature setting.
6. Display icons:
• ECO icon. It is shown when the "energy saving" mode is activated.
5
• Battery icon. It is shown when the charge level of the batteries of the remote controller is low.
• SLEEP icon. It is shown when the "SLEEP" mode is activated.
• FOLLOW ME icon. It is shown when the "FOLLOW ME" function is activated.
7. TIMER display:
• TIMER ON" - Displayed when TIMER ON time is set.
• TIMER OFF" - Displayed when TIMER OFF time is set
2 1
3
2 1
7
3 3
6
5
4
Cod. 3QE46160 - Rev. 00 - 11/2019
7
7 2 1 2 1 7
5
2 1
fig. 2 -
2 1
6
3
3
), cool ( ), dry (
3
3
), average ( 4
5
5
6
4
2 1
2 1 7
7
7
7
3
3
6 6
), heat ( ), fan (
6
), low ( ) or automatic (Auto) 4 4
4
5
5
5
EN
2 1 7
7
6
6
) and back
4
5
4
5
23