Inverter Features - Schumacher Electric PIF-2000 Guide D'utilisation

1.10 Only connect the power inverter to a 12 volt battery or power supply. Do not attempt
to connect the inverter to any other power source, including an AC power source.
Connecting to a 6 volt or 16 volt battery will cause damage to the inverter.
1.11 Make sure the AC plug is tight.
1.12 Do not modify the inverter in any way including cables, plugs, switches or AC receptacles
as it may result in property damage or personal injury.
1.13 Incorrect operation of the inverter may result in property damage or personal injury.
any ordinary household AC wall outlet.
1.14 Do not open – No user serviceable parts inside.
1.15 This device does not include an internal Ground Fault Circuit Interrupter (GFCI).
1.16 To reduce the risk of electric shock, disconnect the inverter from the power source before
attempting any maintenance or cleaning. Simply turning off the controls will not reduce
this risk.
1.17 Do not operate the inverter with damaged cables; have the cables replaced immediately
by a qualified service person. (Call customer service at: 1-800-621-5485.)
1.18
Do not operate the inverter if it has received a sharp blow, been dropped or otherwise
damaged in any way; take it to a qualified service person. (Call customer service at:
1-800-621-5485.)
1.19 Do not disassemble the inverter; take it to a qualified service person when service or
repair is required. Incorrect reassembly may result in a risk of fire or electric shock. (Call
customer service at: 1-800-621-5485.)
1.20 Working in the vicinity of a lead-acid battery is dangerous. Batteries generate explosive
gases during normal battery operation. For this reason, it is of utmost importance that you
follow the instructions each time you use the inverter.
1.21
This inverter employs parts, such as switches and circuit breakers, that tend to produce
arcs and sparks. If used in a garage, locate this inverter 18 inches (46 cm) or more above
the floor level.
1.22 Do not use the inverter with a product that draws a higher wattage than the inverter can
provide, as this may cause damage to the inverter and product.
2.

INVERTER FEATURES

4
6
3
2
8
*NOTE: There is an optional remote control available. To purchase it or for more information,
call customer service at: 1-800-621-5485.
The inverter output is 120V AC and can shock or electrocute the same as
5
7
1
1. ON/OFF Pushbutton Switch
2. Digital Display
3. LED Indicator Lights
• Green = DC Power
• Yellow = Overload Shutdown
• Red = High or Low Input Voltage Shutdown
4. Three 120V AC Outlets (NEMA 5 - 15)
5. Reset Buttons
6. USB Power Port
7.
Remote Control Port*
8. High Speed Cooling Fan
• 2 •