Maintenance - Smartpond 52277 Mode D'emploi

MAINTENANCE

Regular cleaning of the pump may be necessary depending
upon the environment in which it is operated. Clean the pump
when it is visibly soiled or when a drop in performance is
detected. Clean your pump in 5 easy steps!
Step 1. Before cleaning,
always disconnect the pump
from the power source and
remove the inlet screen.
Step 2. Remove the
impeller housing to expose
the impeller assembly.
Step 3. Remove the
impeller assembly by gently
pulling on the impeller
blades. The impeller is held
in place by a magnet.
Step 4. Use a soft cloth or
brush and warm water to
clean the impeller, the inside
of the impeller housing and
the rotor housing.
Step 5. Reassemble all
pump parts and place in
water before reconnecting
to the power source.
TROUBLESHOOTING
IF THE PUMP FAILS TO OPERATE:
• Check to make sure the power cord is plugged in; the pump is getting
power.
• Check the pump outlet and any tubing, nozzles, spitters etc. for kinks
or obstructions.
• Remove the inlet screen and/or pump cover, and impeller housing to
expose the impeller. Turn the impeller to ensure that it is not broken or
jammed.
IF THE PERFORMANCE OF THE PUMP IS NOT SATISFACTORY
OR THE PUMP DOES NOT FLOW EVENLY:
• Check to make sure the pump is completely submerged in water.
• Check to make sure the impeller and the housing are clean.
• Adjust flow control.
PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO LOWE'S: 1-888-755-4497 5