Publicité
Les langues disponibles
Les langues disponibles
Regulate the Temperature in the Cooling Room
Tap the button 'Fridge'. If the display for the cooling
temperature blinks, then every further tap on
'Fridge' changes the temperature by one degree be-
tween 2 °C and 8 °C. If you tap again at the setting
of 8 °C, then 'OFF' illuminates and the cooling for
this part of the appliance is turned off.
ZeroBox
The ZeroBox serves as the optimal storage for meat
and fish.
VeggiBox
The VeggiBox serves as the optimal storage for
fruits and vegetables.
Regulate the Humidity in the VeggiBox
Fruits and vegetables easily decay when stored
wrongly. For that matter, a critical criterion is a right
humidity, which you regulate precisely for the Veggi-
Box with the Humidity-Control:
This slide control is in the cover of the VeggiBox. Is
the slide control open, then the humidity sinks; is it
closed, then the humidity rises. This allows for ideal
storage conditions for fruits and vegetables.
Regulate the Temperature in the Freezer
Tap on the button 'Freezer'. If the display for the
freezer temperature blinks, then every further tap
on 'Freezer' changes the temperature by one degree
between –24 °C and –16 °C.
Special Features
Tap if necessary several times on 'Function' and
subsequently on 'OK', in order to activate the
following special features. To deactivate a special
feature, tap the 'Function' button until the symbol
of the desired function gets illuminated. Then, hit
'OK'. The symbol lighting goes out.
Fast Cooling
This setting fixes the cooling temperature at 2
°C. This temperature cannot be changed until the
function is deactivated.
8955_56_multi.indd 23
Fast Freezing
This setting fixes the freezer temperature for 26
hours at –32 °C. This temperature cannot be
changed until the function is deactivated. After 26
hours, the appliance will freeze again at the preset
temperature.
ECO
This setting fixes the cooling temperature at 4 °C
and the freezer temperature -18 °C. These tem-
peratures cannot be changed until the function is
deactivated.
Holiday
This setting fixes the cooling temperature at 14
°C, and it cannot be changed until the function
is deactivated. The freezer temperature remains
unaffected.
After 5 seconds without further input, the blinking
stops, and the respective function will be taken
over.
Special Functional Features
Memory Preservation in the Case of Power
Failure
Every configuration will be preserved in the case of
a separation from the mains supply and will come
into operation again when the mains supply is
re-established.
Delayed Restart after Mains Failure
So as to protect the appliance from damages, it
cannot be turned on again immediately for a period
of 5 minutes after a short separation from the
mains supply. Wait a few minutes until the appli-
ance starts working again.
Alarm in Case of Overtemperature in the
Freezer
If the temperature in the freezer is above 10 °C
when connected to the mains supply, then the
display for freezing temperature blinks. Tap on any
button or wait 5 seconds until the blinking stops
and the pre-set temperature is displayed again.
Alarm in Case of an open refrigerator door
If the refrigerator door stays open longer than 3
minutes, then a warning signal will go off. Close
the door or tap on any button, in order to stop the
alarm. If the door stays open, however, then the
alarm occurs again after 3 minutes.
Error Symbols
If 'E1', 'E2', 'E3' or other abnormal displays appear,
then there is something wrong with the appliance.
If so, contact our after-sales service.
- 23 -
18.09.2018 15:24:54
Publicité
