Publicité
Les langues disponibles
Les langues disponibles
Ventilation
The air warmed behind the appliance needs to
circulate freely. For this reason, the circulation of air
cannot be compromised.
Caution! Do not cover possible existing ventilation
openings in the back area of the top cover plate!
Connection
• Before you connect the appliance, you have to
make sure that itself and the power plug do not
show any transport damages.
• Connect the appliance only to a shockproof out-
let. The mains voltage has to correspond to the
one stated on the tool identification plate.
• The appliance complies with the guidelines that
are obligatory for CE marking.
• Do not connect the appliance to an inverter
• The power plug should not touch the backside,
in order to avoid possible vibration noise.
• The appliance can be put into operation by
plugging the mains plug into the point. After
this, the display lights up for 2 seconds, and the
appliance operates in 'ECO'-mode.
• A complete switching-off only occurs by pulling
the mains plug.
8955_56_multi.indd 22
Controls and Display
The control is carried out by push buttons under
the display in the middle of the outside of the cold
storage door. If the cold storage door is closed and
no push button is touched within 3 minutes, then
the display light goes out.
To activate it again, touch one of the push buttons.
Fridge
Freezer
Function
OK
1
Display for cooling temperature
2
Display for freezing temperature
3
Symbols for special features
4
Push buttons for the control of the
appliance:
Fridge:
Regulate the temperature in
the cooling room
Freezer:
Regulate the temperature in
the freezer
Function:
Choose special features
OK:
Confirmation of input or exit
of menus
- 22 -
1
2
3
4
18.09.2018 15:24:54
Publicité
