SEVERIN KG 8913 Mode D'emploi page 26

a) Loosen the 3 screws that hold the middle hinge
and then remove it.
b) Raise the freezer door about 50 mm, so you can
remove it from the fridge.
c) Remove the adjustable front stands below the
lower hinge. Then, loosen the 4 screws that hold
the lower hinge and remove it from the fridge.
8913_14_15_multi_(originates_from_8941_42_45_46).indd 26
Step 2 The removal of the doors is now finished.
a) Install the removed parts on the opposite side of
the appliance. Pull the door socket, as shown in
the following figure, and install it in the respec-
tive position on the other side.
b) Remove the screws from the stopper, as shown
in the following figure, and install it on the oppo-
site side of the door.
c) Remove the shaft and the two stoppers from
the lower hinge and install it in the position, as
shown in the following figure.
- 26 -
Step 3
24.09.2018 11:27:49