TE B-450-HS Série Mode D'emploi page 28

11. GENERAL MAINTENANCE
2. Fit the enclosed Allen Key into the right side of the cutter unit to rotate the cutter manually. Remove
the jammed paper and any paper particles from the cutter.
3. Clean the cutter with dry cloth.
Cutter
4. Assemble in the reverse order of removal.
Cleaning the Strip Unit
1. Be sure to disconnect the power cord before cleaning the strip unit.
2. Do not touch the moving parts. To reduce the risk that fingers, jewellery, clothing, etc., be drawn
into the moving parts, push the switch in the "OFF" position to stop movement.
1. First push the strip lever toward the printer to release the hook, and then pull the strip lever.
2. Remove the jammed paper, if any.
3. Clean the strip guide rollers A and B with a cloth moistened with alcohol.
Strip Lever
Strip Guide Roller A
Strip Guide Roller B
WARNING!
E11-4
ENGLISH VERSION EO1-33020
11.3 REMOVING JAMMED PAPER
Allen Key
Fig. 11-6
Fig. 11-7