Delay End - Samsung WF50K7500A Manuel De L'utilisateur

Delay End

You can set the washer to finish your wash automatically at a later time by choosing a
delay of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the
time the wash will finish.
1. Select a cycle. Then, change the cycle settings if necessary.
2. Press Delay End repeatedly until a desired end time is set.
3. Press START/PAUSE. The
4. To cancel Delay End, restart the washer by pressing POWER.
Real-life case
You want to finish a two-hour cycle 3 hours from now. To do this, you add the Delay End
option to the current cycle with a 3-hour setting, and then press START/PAUSE at 2:00
p.m. The washer starts operating at 3:00 p.m. and ends at 5:00 p.m. Provided below is the
time line for this example.
2:00 pm
Set the Delay End to 3 hours
Steam
With the Steam cycle, the washer senses the weight of the load and controls the steam
effect according to the load size. This improves washing performance.
Available Steam cycles are: NORMAL, HEAVY DUTY, BEDDING, WHITES, SANITIZE,
ALLERGEN, and DEEP STEAM.
1. Turn the Cycle Selector to select a Steam cycle.
2. Press Steam.
3. Add detergent and fabric softener as instructed.
4. Press START/PAUSE to start the cycle.
NOTE
• Steam may not be visible or present during the cycle. This is normal.
• Unlike other Steam cycles, you don't need to press Steam for DEEP STEAM as the
Steam function turns on automatically.
WF7500K-DC68-03667A-03_EN.indd 47
indicator turns on with the clock running.
3:00 pm
Start
5:00 pm
End
English 47
2018/1/8 11:03:21