Spin Only; Garment; Delay End; Drum Light - Samsung WF45H6300A Serie Mode D'emploi

Masquer les pouces Voir aussi pour WF45H6300A Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

washing a load of laundry
Deactivating the Child Lock function
Press and hold both the soil level and spin buttons simultaneously for approximately 6 seconds.
• When you deactivate the Child Lock function, the door is unlocked and the "Child Lock " is turned off.
• The Child Lock function prevents children or the infirm from accidently operating the washer and
injuring themselves.
warning
• If a child enters the washing machine, the child may become trapped and suffocate.
• Once you have activated the Child Lock function, it continues working even if the power is turned
off.
• Opening the door by force can result in injury due to damage to the product.
To add laundry after you have activated the Child Lock function, you must first pause or deactivate the
Child Lock function.
cauTion
If you want to open the door of the washing machine when the Child Lock function is activated:
• Pause or deactivate the Child Lock function.
• Turn the washing machine off and then on again.

Spin Only

If you press the power button and then press and hold the spin button for 3 seconds, the
spin time will be displayed on the display panel.
Then, press the spin button repeatedly until the required spin level is selected, and then press
the sTarT/pause button.
Before pressing the Spin Only button to use the Spin Only function, you can select a cycle
with the Cycle Selector. If you have selected a cycle, you can only select the spin level
corresponding to the selected cycle.

Garment+

You can add or take out laundry items even after the wash has started, as long as the "
is on. Pushing the sTarT/pause button unlocks the door, unless the water is too hot or if there
is too much water in your washer. If you are able to unlock the door and wish to continue the
wash cycle, close the door, and then press the sTarT/pause button.

Delay End

You can set the washing machine to start your wash automatically at a later time, choosing a delay time.
The hour displayed indicates the time at which the wash will be ended.
1. Set your wash cycle.
2. Press the delay end button repeatedly until the delay time is set.
3. Press the sTarT/pause button. The "Delay End
counting down until it reaches the set time.
4. To cancel a Delay End function, press the power button and then turn the washing machine on
again.

Drum Light

1. If the door is opened when the power is on, the Drum Light is automatically turned on.
2. If the door is closed when the power is on, the Drum Light is automatically turned off.
3. Press the steam button to turn the Drum Light on or off.
4. If 5 minutes have passed after the Drum Light is turned on, the Drum Light is automatically
turned off.
WF45H6-03385A-04_EN.indd 22
" indicator will be lit, and the clock will begin
22_ English
" light
2014/10/13 11:50:20

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wf45h6100a serieWf45h6300aw

Table des Matières