Olimpia splendid AURA DI Mode D'emploi Et D'entretien page 23

c. The appliance automatically counts the functioning time. After 2000 hours of functioning the
"FILTER RESET" button led (5c) turns on to warn that it is necessary to clean or replace the
filters (see the following paragraphs).
After cleaning or replacing the filters, keep button "FILTER RESET"
seconds to reset the hours counting. The "FILTER RESET" button led (5c) flashes and the
appliance emits a "beep".
Do not use the appliance without the filters (2 and
3) or if these latter are dirty or worn.
HEPA FILTER (2)
a. The filter "2" is composed of the pre-filter (2b) and of the Hepa filter (2a).
b. The filter "2" must be cleaned or replaced when the "FILTER RESET" button led (5c) turns
on.
c. Clean the filter using a vacuum cleaner or wash it under running water.
Use a soft brush if necessary.
d. Replace the filter if damaged or worn.
Do not use a strong water spray which could damage the filter.
2b
e. Wait for the filter to be completely dry before repositioning it in the appliance.
OK
2a
OK
(5c) pressed for three
NO
EN - 10
AURA DI