INFOSEC UPS SYSTEM E3 PRO 5000 RT Manuel Utilisateur page 35

TECHNICAL SPECIFICATIONS
Technology
Capacity
Power Factor
PHYSICAL CHARACTERISTICS
Dimensions D x W x H (mm) -
UPS
Net Weight (kg) - UPS
INPUT
Voltage
Input nominal voltage
Frequency Range
OUTPUT
Voltage
Voltage Regulation
Frequency Range (Synchronized
Range)
Frequency Range (Batt. Mode)
Current Crest ratio
Harmonic distorsion
Line mode to
Transfer
Battery mode
Time
Inverter to Bypass
Waveform
Terminal
EFFICIENCY
AC Mode
Battery Mode
BATTERY
Battery charger
Charging current
Battery type
Batt specs & Number
Typical Recharge Time
Charging voltage
Backup time
INDICATORS
LCD display
ALARMS
Battery Mode
Low Battery
Overload
Fault
MANAGEMENT / COMMUNICATION
INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 01 16 AA 59 204 09
E3 PRO
5000 RT
On Line Double Conversion
5000 VA/4500W
UPS Unit: 530x438x88 [2U]
Battery Pack:688x438x88 [2U]
UPS Unit: 15
Battery Pack: 55
110-300 VAC (Based on load at 50%)
176-300 VAC (Based on load at 100%)
46Hz ~ 54 Hz or 56Hz ~ 64 Hz
46Hz ~ 54 Hz or 56Hz ~ 64 Hz
50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz
≦ 5 % THD (Non-linear Load)
92%
90%
Operates when UPS connected to mains
16
9 hours recover to 90% capacity
From 5 to 30 min. depending on the connected load
Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault
Sounding twice every second
E3 PRO
6000 RT
6000 VA/5400W
0,9
208/220/230/240VAC
208/220/230/240VAC
± 1%
03:01
≦ 3 % THD (Linear Load)
0ms
0ms
Pure Sinewave
Yes
Adjustable from 1 to 6A
12V9Ah
218.4 VDC ± 1%
indicators
Sounding every 4 seconds
Sounding every second
Continuously sounding
E3 PRO
10k RT
10k VA/9000W
UPS Unit : 605x438x133
[3U] Battery Pack:
605x438x133 [3U]
UPS Unit : 18
Battery Pack : 65
93%
91%
20
35