INFOSEC UPS SYSTEM E3 PRO 5000 RT Manuel Utilisateur page 22

3-6. LCD Setting
There are three parameters to set up the UPS. Refer to the following diagram.
Parameter 1
Parameter 2
List of 20 programs available for parameter 1:
Code Description
Output voltage
01
Output frequency
02
Voltage range for bypass
03
Frequency range for bypass
04
Reserved
05
Reserved
06
Reserved
07
Bypass mode setting
08
Battery maximum discharge time
09
setting
Reserved
10
Reserved
11
12 Reserved
13 Battery voltage adjustment
14 Reserved
INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
22
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 01 16 AA 59 204 09
Parameter 3
Parameter 1 is for program alternatives. Refer
to the table below.
Parameter 2 and parameter 3 are the setting
options or values for each program.
NOTE: Select "Up" or "Down" buttons to
change the programs or parameters.
Bypass AC CVCF
Y
Y
Y
Y
Y Y
Y Y
Y Y
Battery
Battery
Test
Y Y
Y Y
Y
Y