AT THE END OF EACH SESSION OF USE.
· Remove the filter from the filter holder and mount the
blind filter (8) provided.
· Pour into the blind filter (8) special detergent for coffee
machines (for quantities see manufacturer's instructions).
· Start the machine as described in the relevant paragraphs.
· Fit the filter holder with the blind filter on the group.
· Raise the lever (9) and hold it up until the pressure gauge
(10) reaches 12 bar pressure and then lower; 4/5 times
make this fake delivery.
· Remove the filter holder from the machine and empty the
product.
· Replace the filter holder with the blind filter in the machine
and repeat for 4/5 times the false dispense as described
above.
· Remove the filter holder from the machine and remove
the blind filter.
· Lift the lever (9) and make a water supply from the group,
cleaning the shower head with the brush supplied.
ATTENTION: During the water supply and
cleaning the shower head, be very careful,
danger of scalding.
10
9
8
23