Design Of The Device - InnoCigs STEAMAX GX2/4 Manuel D'utilisation

STEAMAX GX2/4 – DESIGN OF THE DEVICE
How to install the batteries
Use of 2 batteries
Open the battery cover and place the two charged 18650 batteries according to the marked poles in the
device. For closing, please use the smaller of the two battery covers.
Use of 4 batteries
Open the battery cover and place two of the four charged 18650 batteries according to the marked poles
in the device. The other two batteries are placed in the enlarged battery cover according to the poles. Then
connect the battery cover and the device
58
www.steamax.com
Note: If the display does not light up after switching the device on, make sure
that you have inserted the batteries correctly and that they have sufficient
power. If the device still cannot be switched on despite fulfilling all the afore-
mentioned prerequisites, please contact our customer service department