Description Of The Air Conditioner Functions; Main Switch-On And Running Management; Eco Key; Turning The Unit On/Off - Olimpia splendid UNICO TOWER Instructions Pour L'installation

3.6 - DESCRIPTION OF THE AIR CONDITIONER FUNCTIONS

3.6.1 - Main switch-on and running management

• System management is possible using the remote control.
in order to transmit commands to the indoor appliance, point the front of the remote control toward the
appliance's control panel.
the device emits a beep when it receives a command.
• The maximum distance from which the appliance can be controlled is about 8 meters (with charged bat-
teries).

3.6.2 - ECO key

• Press B8 on the remote control to activate the energy conservation function, automatically optimizing the
machine features (on the display symbol D14 appears).

3.6.3 - Turning the unit ON/OFF

• Press key B1 on the remote control to activate or deactivate (stand-by) the air conditioner.
the control system of the unit is equipped with memory, for this reason all the settings won't be lost when
shutting off the appliance itself.
In case of prolonged stop of the machine, it must be deactivated turning the main
switch off or unplugging the machine from the mains.

3.6.4 - Operation in "Cooling" mode only

• When used in this mode, the air conditioner dehumidifies and cools the room.
• To activate this mode, press several times the key B5 on the remote control until when the symbol D2
appears on its display.
• This mode can also be activated via the signal console buttons (Fig.B).
• In this run mode, the required temperature and fan speed can be set.
after three minutes (as a maximum) from activation in this operating mode the compressor will start and
the appliance starts emitting cold air.
3.6.5 - Operation in "Dehumidification" mode only
• When used in this mode, the air conditioner eliminates the humidity in the room.
this function can be extremely useful between seasons, particularly on rainy days when the temperature
is not uncomfortable but the excess humidity feels unpleasant.
• In this mode, both room temperature and fan speed settings are ignored, which correspond to minimum.
EN - 22