Becker Centronic VarioControl VC520 Notice De Montage Et D'utilisation page 23

• If more than one drive is going to be operated by the radio
receiver, the drives must be decoupled by relay controls.
There is no need for decoupling in the case of our drives
with electronic limit switching.
•
Always take into account the device switching current.
1. Connect the device as follows:
2. Program a transmitter into the receiver (see chapter "Programming the
transmitter")
3. Fasten the device in the socket.
Ensure that there is optimum radio reception.
green-yellow
blue
brown/black
black/brown
Tubular drive
23 - en