Publicité
①
4
②
③
④
English
TO OPEN/CLOSE SHIELD
To open, push the shield latch lever up and the shield will open slightly ①.
Then pull the bulge on the shield slightly outward so the shield clears the latch
post on the helmet ②, and raise the shield.
WARNING:
Do not attempt to open the shield without using the latch
system, or push down on the shield latch lever ③, as damage to the latch
system may occur.
To close, push the shield down until the latch post fully engages the shield
and the latch lever captures the bottom of the shield ④.
WARNING:
Be sure to latch the shield properly before riding. If not
latched securely, the shield may open unexpectedly from wind pressure,
vibration or even normal head movement.
If shield operation becomes stiff, flexing excessively as you raise or lower
it, apply one or two drops of supplied silicone lubricant around sliding slot
and brass stud, and wipe off with soft tissue paper for shield operation
maintenance. If shield is dirty, clean before applying silicone.
Publicité
Chapitres
