Selecting The On-Screen Menu Language (Language); Selecting The Input Signal - Sony GDM-5502 Mode D'emploi

Selecting the on-screen menu
language (LANGUAGE)
English, French, German, Spanish, Italian, Dutch, Swedish,
Russian and Japanese versions of the on-screen menus are
available. The default setting is English.
1
Press the MENU/OK button.
The menu appears on the screen.
MENU
b
OK
2
Press the m/M buttons to highlight
press the MENU/OK button.
MENU
OK
b
3
Press the m/M buttons to highlight
and press the MENU/OK button.
MENU
OK
b
4
Press the m/M buttons until the desired language
appears on the screen. Then press the MENU/OK
button to select the language.
Each time you press the m/M buttons, the language can be
selected appears cyclically.
• ENGLISH
• FRANÇAIS: French
• DEUTSCH: German
• ESPAÑOL: Spanish
• ITALIANO: Italian
• NEDERLANDS: Dutch
• SVENSKA: Swedish
• : Russian
• : Japanese
To close the menu
m M
Press the / buttons to select
closes automatically after about 30 seconds.
To reset to English
Select ENGLISH in step 4 above.
8
EX I T
CONTRAST
85
1 6 0 0 x 1 2 0 0 / 8 5 H z
OPTION and
OPT ON I
CONTROL
LOCK
ON
b
OFF
1 6 0 0 x 1 2 0 0 / 8 5 H z
LANGUAGE
OPT ON I
LANGUAGE
ENGL SH I
FRANÇA S I
b
DEUTSCH
1/3
1 6 0 0 x 1 2 0 0 / 8 5 H z
. If no buttons are pressed, the menu

Selecting the input signal

You can connect two computers to this monitor using the HD15
connectors. To select one of the two computers, use the INPUT
switch.
Move the INPUT switch.
The selected connector appears on the screen for 3 seconds.
INPUT
1
"INPUT 1" or "INPUT 2" appears on the screen.
Note
If no signal is input to the selected connector, NO SIGNAL appears on the
screen. After a few seconds, the monitor enters the power saving mode. If
this happens, switch to the other connector.
2